Victory Amps VC35H The Copper Head

The sonic blueprint was set in late-1950s England, then modified, evolved and refined through to the hand-made, boutique valve amps of the 21st century. Yet this is far more than a re-imagined AC-alike. In classic Victory Compact Series style, we’ve packed all those tones and more into a pint-sized powerhouse that can deliver anything from traditional chiming trebles, through jangling pop, punching mid-rich rock, higher-gained classic rock and plenty of American boutique-style cleans and low-gain textures to boot. It’s the EL84 amp that will keep the purists happy and attract a load of new friends along the way.
Artnr: VC35HEAD
Lägg i önskelistan
Webblager: Finns i lager
Finns varan i butik?
Luleå
Skellefteå
Umeå
Victory Amplification
12995 kr
Antal: 
Öppet köp i 14 dagar Fri frakt över 1000 kr Komplett serviceverkstad
  • Format:  Single-channel all-valve head
  • Power:  High Power 35 Watts; Low Power 12 Watts,
  • Valves: 2 x 12AX7, 1 x EF184, 4 x EL84
  • Size (mm): 342(w) x 185(h) x 185(d) including handle, feet & controls
  • Weight: 8.2kg / 18.1lbs
  • Extra features: 
  • Bass Cut switch
  • Mid Boost switch
  • Footswitchable digital reverb
  • Footswitchable series effects loop
  • Low Power mode
  • Skeletonised metal case with rubber handle
  • Dual-button footswitch for reverb on/off and FX loop on/off included
  • External bias test and adjustment points for power valves
  • Padded carry bag included
A word from Martin Kidd, Victory's Chief Designer...
 
“We’ve been talking about a ‘classic’ EL84 amp for ages. It’s a unique tone and feel with a specific kind of high-end response that differs from any of our other amps.
We batted back and forth between a more traditional Vox approach and something more ‘boutique’, but also with some Marshall-type 1974/2061 sounds.
We veered away from those circuits significantly, however. The VC35 uses a mix of fixed and cathode bias in full-power mode and is cathode biased in low power. There’s also a NOS EF184 pentode valve in a cathode-follower configuration to drive the tone stack in the preamp.
Victory has a great stock of them, they have very low microphonics and have proved to be superbly well made and reliable.

VC35 The Copper can deliver a wide range of clean and crunchy sounds convincingly, alongside plenty more that will keep the higher gain fans happy. What’s really surprised me is that so many of our close friends of varying playing styles are equally enthusiastic about its sounds and feel. I’m sensing a real buzz around this one!”

Plenty of Gain Options​
You can dial in sparkly, chiming cleans right through to heavy gain rock sounds all from one knob.
It’s very interactive with the tone controls, then balance to taste with the master volume.
 
Mids for Voicing
We’ve included a mid boost switch to add bite and overdrive for rich, vocal lead tones.Try it with the bass cut and plenty of gain for classic rock soloing bliss.

Master Tone Cut
This global tone control works as it does in the classic Vox amps... except the trebly stuff is found clockwise. It’s great for that final high-end response tone tweak to your playing environment.
 
Series Effect Loop
If you’re running the VC35 gainy, your time-based effects – reverb and delay – will stay cleaner sounding here. For classic clean tones, run effects into the front.
 
Sculptable Low End
A rotary pot and bass cut switch give you the control to dial in anything from skinny British ’60s pop jangle, to full and fat, modern boutique tones.
 
Reverb
VC35 has a no-hassle, super-reliable digital reverb (like our V40) to keep you ambient. Somewhere between room and plate... and there’s plenty available!

High & Low Power
35 watts/full power is great for punch and headroom; 12 watts low power gives less volume, more compression and a different harmonic and dynamic response.
 
External Bias Test & Adjustment
When it’s time to change your EL84 output valves, you can test and adjust the bias for the replacements quickly and safely.
Typ av förstärkare: Topp